picolibrary-microchip-megaavr

::picolibrary::WIZnet::W5500::IP::TCP::Client echo interactive test

Table of Contents

1. Test Configuration Options
2. Test Executable Name

Test Configuration Options

The ::picolibrary::WIZnet::W5500::IP::TCP::Client echo interactive test supports the following configuration options:

• PICOLIBRARY_WIZNET_W5500_IP_TCP_CLIENT_ENABLE_ECHO_INTERACTIVE_TEST (defaults to OFF): enable the ::picolibrary::WIZnet::W5500::IP::TCP::Client echo interactive test
  • The following configuration options are available if PICOLIBRARY_WIZNET_W5500_IP_TCP_CLIENT_ENABLE_ECHO_INTERACTIVE_TEST is ON:
    • PICOLIBRARY_WIZNET_W5500_IP_TCP_CLIENT_ECHO_INTERACTIVE_TEST_CONTROLLER_SPI: ::picolibrary::WIZnet::W5500::IP::TCP::Client echo interactive test controller SPI
    • PICOLIBRARY_WIZNET_W5500_IP_TCP_CLIENT_ECHO_INTERACTIVE_TEST_CONTROLLER_SPI_CLOCK_RATE: ::picolibrary::WIZnet::W5500::IP::TCP::Client echo interactive test controller SPI clock rate
    • PICOLIBRARY_WIZNET_W5500_IP_TCP_CLIENT_ECHO_INTERACTIVE_TEST_CONTROLLER_SPI_CLOCK_POLARITY: ::picolibrary::WIZnet::W5500::IP::TCP::Client echo interactive test controller SPI clock polarity
    • PICOLIBRARY_WIZNET_W5500_IP_TCP_CLIENT_ECHO_INTERACTIVE_TEST_CONTROLLER_SPI_CLOCK_PHASE: ::picolibrary::WIZnet::W5500::IP::TCP::Client echo interactive test controller SPI clock phase
    • PICOLIBRARY_WIZNET_W5500_IP_TCP_CLIENT_ECHO_INTERACTIVE_TEST_DEVICE_SELECTOR_PORT: ::picolibrary::WIZnet::W5500::IP::TCP::Client echo interactive test device selector PORT
    • PICOLIBRARY_WIZNET_W5500_IP_TCP_CLIENT_ECHO_INTERACTIVE_TEST_DEVICE_SELECTOR_MASK: ::picolibrary::WIZnet::W5500::IP::TCP::Client echo interactive test device selector mask
    • PICOLIBRARY_WIZNET_W5500_IP_TCP_CLIENT_ECHO_INTERACTIVE_TEST_NETWORK_STACK_PHY_MODE (defaults to ALL_CAPABLE_AUTO_NEGOTIATION_ENABLED): ::picolibrary::WIZnet::W5500::IP::TCP::Client echo interactive test network stack PHY mode
    • PICOLIBRARY_WIZNET_W5500_IP_TCP_CLIENT_ECHO_INTERACTIVE_TEST_NETWORK_STACK_PING_BLOCKING_CONFIGURATION (defaults to DISABLED): ::picolibrary::WIZnet::W5500::IP::TCP::Client echo interactive test network stack ping blocking configuration
    • PICOLIBRARY_WIZNET_W5500_IP_TCP_CLIENT_ECHO_INTERACTIVE_TEST_NETWORK_STACK_ARP_FORCING_CONFIGURATION (defaults to DISABLED): ::picolibrary::WIZnet::W5500::IP::TCP::Client echo interactive test network stack ARP forcing configuration
    • PICOLIBRARY_WIZNET_W5500_IP_TCP_CLIENT_ECHO_INTERACTIVE_TEST_NETWORK_STACK_RETRANSMISSION_RETRY_TIME (defaults to 2000): ::picolibrary::WIZnet::W5500::IP::TCP::Client echo interactive test network stack retransmission retry time
    • PICOLIBRARY_WIZNET_W5500_IP_TCP_CLIENT_ECHO_INTERACTIVE_TEST_NETWORK_STACK_RETRANSMISSION_RETRY_COUNT (defaults to 8): ::picolibrary::WIZnet::W5500::IP::TCP::Client echo interactive test network stack retransmission retry count
    • PICOLIBRARY_WIZNET_W5500_IP_TCP_CLIENT_ECHO_INTERACTIVE_TEST_NETWORK_STACK_MAC_ADDRESS (defaults to 0x02,0x00,0x00,0x00,0x00,0x00): ::picolibrary::WIZnet::W5500::IP::TCP::Client echo interactive test network stack MAC address
    • PICOLIBRARY_WIZNET_W5500_IP_TCP_CLIENT_ECHO_INTERACTIVE_TEST_NETWORK_STACK_IPV4_ADDRESS (defaults to 0,0,0,0): ::picolibrary::WIZnet::W5500::IP::TCP::Client echo interactive test network stack IPv4 address
    • PICOLIBRARY_WIZNET_W5500_IP_TCP_CLIENT_ECHO_INTERACTIVE_TEST_NETWORK_STACK_IPV4_GATEWAY_ADDRESS (defaults to 0,0,0,0): ::picolibrary::WIZnet::W5500::IP::TCP::Client echo interactive test network stack IPv4 gateway address
    • PICOLIBRARY_WIZNET_W5500_IP_TCP_CLIENT_ECHO_INTERACTIVE_TEST_NETWORK_STACK_IPV4_SUBNET_MASK (defaults to 255,255,255,255): ::picolibrary::WIZnet::W5500::IP::TCP::Client echo interactive test network stack IPv4 subnet mask
    • PICOLIBRARY_WIZNET_W5500_IP_TCP_CLIENT_ECHO_INTERACTIVE_TEST_NETWORK_STACK_SOCKET_BUFFER_SIZE (defaults to _2_KiB): ::picolibrary::WIZnet::W5500::IP::TCP::Client echo interactive test network stack socket buffer size
    • PICOLIBRARY_WIZNET_W5500_IP_TCP_CLIENT_ECHO_INTERACTIVE_TEST_CLIENT_NO_DELAYED_ACK_USAGE_CONFIGURATION (defaults to DISABLED): ::picolibrary::WIZnet::W5500::IP::TCP::Client echo interactive test client no delayed ACK usage configuration
    • PICOLIBRARY_WIZNET_W5500_IP_TCP_CLIENT_ECHO_INTERACTIVE_TEST_CLIENT_MAXIMUM_SEGMENT_SIZE (defaults to 0x0000): ::picolibrary::WIZnet::W5500::IP::TCP::Client echo interactive test client maximum segment size
    • PICOLIBRARY_WIZNET_W5500_IP_TCP_CLIENT_ECHO_INTERACTIVE_TEST_CLIENT_TIME_TO_LIVE (defaults to 0x80): ::picolibrary::WIZnet::W5500::IP::TCP::Client echo interactive test client time to live
    • PICOLIBRARY_WIZNET_W5500_IP_TCP_CLIENT_ECHO_INTERACTIVE_TEST_CLIENT_KEEPALIVE_PERIOD (defaults to 0x00): ::picolibrary::WIZnet::W5500::IP::TCP::Client echo interactive test client keepalive period
    • PICOLIBRARY_WIZNET_W5500_IP_TCP_CLIENT_ECHO_INTERACTIVE_TEST_CLIENT_LOCAL_ENDPOINT (defaults to 0): ::picolibrary::WIZnet::W5500::IP::TCP::Client echo interactive test client local endpoint
    • PICOLIBRARY_WIZNET_W5500_IP_TCP_CLIENT_ECHO_INTERACTIVE_TEST_CLIENT_REMOTE_ENDPOINT (defaults to Address{ { 0,0,0,0 } }, 0): ::picolibrary::WIZnet::W5500::IP::TCP::Client echo interactive test client remote endpoint

Test Executable Name

test-interactive-picolibrary-wiznet-w5500-ip-tcp-client-echo

This site is open source. Improve this page.